Siramik Ceramic Coating

TheMattFinish is proud to announce that it is am Approved SiRamik Glasscoat Accredited Detailer able to offer the full a range of products that have been introduced to provide the best possible protection to your vehicles from SC 15, SC Mist and the accredited SC- Ultima, SC-HR and market leading Diamas Professionali, the first diamond coating on the market.

Due to the nature of these processes, these packages must be completed indoors. This can be provided at TheMattFinish HQ in Sittingbourne or at a clients choosing with adequate space and amenities. Click here for more details on the unit

 

Siramik Glasscoat, Ceramic Glasscoat

 

SC-15- Prices starting from £75 per layer

SC15 is a leading range coating, it is high in active content and water contact angle is over 100 degrees, It also has had introduced to the chemical make up a further 15% additional catalyst to increase initial cure time and smoother application. With correct maintenance it will last into years not months.

Two coats of SC15 is recommend and to be left overnight indoors, SC Mist could be used on top and does add an ultra slick surface coating that intensifies the look of the finish.

SiRamik Surface Coat Spray though is not just for maintenance. It contains enough active content to act alone and last as a stand alone LSP with 3-6 months realistic durability

Maintenance is obtained through a maintain wash shampoo which has a gel type consistency and is a fantastic shampoo to keep the self cleaning properties of all coating systems alive.  Mist can be used as a ‘top up’ spray sealant for the SC15 or coating system or as a stand alone product offering between 3-6 month durability.

Whilst some durability claims can be a little "out there" the SiRamik SC15 Coating is tested within the countries very own government testing laboratories and not in a manufacturers laboratory, this gives a true definition of test and not one that is portrayed by others.

SiRamik will be offered along with existing packages so for more information please contact me for details

Accredited Only Products-

Advanced Protection Technolgy- SC-HR, SC-Ultima- Prices starting from £275 

Siramik Glasscoat would like to introduce our new Advanced Protection Technology for vehicle paintwork, glass, wheels and plastic. This is a 2 part system that contains extreme elements of Silicon to form an ultra durable and tough coating that has the ability to withstand levels of bird lime, marring and the like with a potential durability of over 3+ years.

Advanced Protection Technology takes 2 coatings where combined boast 175% glass ingredient, but it doesn’t end there as these can also be used in conjunction with SC15 to produce not only a super durable protection package but one that looks stunning with levels of gloss not usually associated from these types of coatings.

Part 1

SC-HR Heat Resistance Coating-

This is the base layer, containing the highest silicon of the 2 coatings this has been formulated to withstand heat to the extreme temperatures of exhausts and engine components and is ideally suited for alloy wheels and brake callipers, as the base layer for the paintwork this is the toughest and strongest we can offer and alone will provide in excess of 2+ years, it is also currently undergoing tests for a hard glass coating for satin or matt finish paintwork.

Part 2

SC-Ultima 

Ultima is the upper coating that will provide the extreme gloss and crisp clear looks that will create an unbelievable hydrophobic layer, adding further protection and superior cleaning abilities. Ultima is also as with SC-HR suitable for all plastics where durability is again excellent. As with coatings of this technology most would require infra red drying times but Ultima is a 60 minute fast cure with no IR needed, however overnight cure indoors or undercover is imperative to the coatings initial protection as complete cure is 60 hours.

How and where is it applied?

APT (Advanced Protection Technology)  can only be applied by a recognised and accredited Siramik Glasscoat application specialist where the vehicle in question will be subjected to numerous levels of decontamination and cleansing processes prior to any machine correction that may be needed before applying no less than 2 layers of the coatings on the paintwork and 1 of SC-HR on wheels,  a protective coat yet to be determined will also be added for protection of the coating whilst within the first 60 hours where full hardness is achieved.

Diamas Professionali- Prices start from £150 per layer

Diamas Professionali, a worlds first, never has this been done before and Siramik Glasscoat are proud to be the first paintwork protection brand to introduce a true diamond coating for vehicle paintwork.


Containing Aggregated Diamond Nanorods we have taken liquid protection to the highest possible place, crystal clear paintwork is the result of an optically clear coating that will not mute any candy’s, flips, flake or pearls meaning the paint you choose is the paint you see.

In conjunction with Siramik Glasscoat, TheMattFinish would proudly like to introduce the new and unique liquid protection technology for vehicle paintwork, wheels & plastics "Diamas Professionali" 

SiRamik Glasscoat are proud to be the first paintwork protection brand in the world to introduce a true diamond coating for vehicle paintwork. Over 12 months of research, testing and development have now come to fruition, and can now unleash the ground breaking technology of "Daimas Professionali".

Diamas Professionali contains aggregated diamond nanorods, sometimes referred to as ADNR's, with this we have taken liquid protection to the highest possible level, where crystal clear paintwork is the result of an optically clear coating that will not mute any metallic flake, pearl or solid colour, meaning the paint you choose is the paint you see.

It is commonly known that diamonds are the hardest material known to man, not to mention the most precious. Diamas Professionali utilizes ADNR's in sizes no greater than 3-4n, meaning on a nano scale these are used as an anchor for the coating which in turn strengthens the layer applied, giving a more stable protective barrier, as a whole ADNR's have a combined strength of which has been measured at stronger than a diamond itself.

 

 

Siramik Glasscoat, Ceramic Glasscoat, Siramik SC15

Siramik Approved Detailer-

SC15 is a leading range coating, it is high in active content and water contact angle is over 100 degrees, It also has had introduced to the chemical make up a further 15% additional catalyst to increase initial cure time and smoother application. With correct maintenance it will last into years not months.

Areas Covered

I live in Rainham Medway with my unit based in Sittingbourne Swale and regularly travel to clients with facilities to meet their needs.  

Although unit based, if you were happier for me to work on your car at a desired location (provided there is space and amenities) I am more than happy to do so, please feel free to get in touch for a quotation.  

Unit Facilites 

My unit is based in Sittingbourne, Swale on the Eurolink Industrial Estate. When booking your vehicle in at TheMattFinish you are guaranteed of security and optimal conditions to adequately prepare your vehicle to the highest standard. Due to the advancement of chemistry in the latest products a stabilised controlled environment is essential on the curing ability of modern ceramic coatings. The unit is easy to find being 5 minutes from the local train station and easily accessible from the M2/M20 

© 2017 The Matt Finish - All rights reservedCMS by Affordable Web Design